Bühnenbeleuchtung
Stimmungsbeleuchtung
Zubehör
Signature Serie
Veranstaltungen
FX-Maschinen
Alle anzeigen
UKING DMX controllers give users a central point of control for fixtures that use the DMX512 protocol. The current collection entry is UKING 192 DMX controller, a 192-channel console designed for live concerts, KTV rooms, DJs, and small club installations. Buyers should review the listed channel count, fixture capacity, and programmable banks to make sure the controller matches the size of their existing lighting setup.
For venues that need a larger channel count, additional DMX control options are available separately. Planning channel headroom, fixture addressing, and cable runs at the same time as the controller purchase helps avoid bottlenecks later, especially when the lighting setup is expected to grow with the venue. As a rule of thumb, leaving a few spare channel groups free makes it much easier to add one or two fixtures later without re-addressing the whole rig.
Choosing a DMX controller that fits the setup
A DMX controller is usually chosen by total channel count, fixture capacity, and the level of programming required. A 192-channel console can drive up to twelve fixtures at sixteen channels each, which is enough for many small to mid-sized venues. For larger or more complex shows, a higher channel count and more programmable banks will be needed.
Build quality, fader feel, and connector layout also matter for daily use. A controller with a solid chassis, labelled faders, and standard DMX output connectors tends to last longer under frequent setup and teardown. Buyers should also confirm that the controller supports the operating modes their fixtures use, including sound activation, automatic programs, and master-slave, before committing to a model. Because DMX512 is a standard protocol, UKING controllers can also drive fixtures from other brands as long as the total channel count stays within 192.
Recommended UKING DMX controller
UKING 192 DMX CONTROLLER supports up to 192 DMX channels across twelve fixtures, with sixteen channels per fixture. It includes 23 programmable scene banks, six programmable chases, and a built-in microphone for sound-to-light triggering. The console is sized for live concerts, KTV rooms, DJs, and small clubs that need dependable central control without moving into a higher price tier.
Frequently Asked Questions
UKING 192 DMX controller supports up to 192 channels in total, which is enough to run twelve fixtures at sixteen channels each. This covers most small to mid-sized venue setups, including KTV rooms, small clubs, and mobile DJ rigs. Fixtures that use fewer channels, such as simple PAR lights, leave room for additional units, so the practical fixture count can be higher depending on the equipment mix.
Yes. The controller is designed to be usable by first-time operators. Built-in scene banks, programmable chases, and a sound-to-light microphone allow simple shows to be set up without detailed programming, while DMX addressing and channel assignments remain available for more advanced users as the setup grows. Most operators can run a basic party show from the presets on the first night and learn programmed cues gradually.
UKING 192 DMX controller offers 23 programmable scene banks, six programmable chases, master-slave operation, and a built-in microphone for sound-to-light triggering. Together these give operators a practical balance between ready-made effects and the option to program more detailed cues for recurring shows. Scene banks are especially useful for venues with regular events, because a completed look can be saved once and recalled instantly.
Yes. The controller uses the standard DMX512 protocol, so it can drive any fixture that supports DMX512 control. Buyers should check the channel requirements of each fixture in the setup, then allocate channel groups within the 192-channel total to make sure every fixture can be addressed correctly. Writing down the address plan for the rig also saves time when fixtures are swapped between events.
Buyers planning to move beyond 192 channels should look at total channel count, fixture capacity, programmable bank size, and the physical layout of faders and buttons. The size and weight of the console also increase with channel count, so confirm that you have enough space to transport and store the unit for the events you normally work. For many small venues, expanding gradually with fixtures that use fewer channels is more cost-effective than buying a larger console upfront.
The UKING 192 DMX controller uses standard 3-core XLR input and output connections. You will need DMX signal cables with male-to-female XLR connectors to daisy-chain fixtures. The controller also supports MIDI input for advanced integration with other MIDI-compatible equipment. For basic operation, connect the DMX output of the controller to the DMX input of the first fixture, then link subsequent fixtures from the DMX output of each unit.
