Model: ZQ03004

Color: black

Material: iron

Power supply: 110V-250V, 50~60Hz

Maximum power: 30W

Laser parameters: red: 100mw 650nm, green: 30mw 515nm, blue: 150mw 450nm, yellow: 30mw

LED light source: 3 * 3 red, green and blue 3-in-1 light beads

Beam angle: 120 °

Control: remote control, DMX512

Working mode: DMX, sound activated, self-propelled, master-slave, remote control

Channel: 12CH

Patterns and effects: more than 100 kinds of patterns, more than 300 kinds of effects

Interface: 3-pin XLR jack for DMX or maser-slave link

Display: digital tube

Power cord length: about 173cm

Applicable occasions: stage, performance, banquet hall, multi-function hall, bar, slow rock bar, performing arts bar, nightclub

Product Features:

1. DMX control: 12CH, the unit has a power-off function. If there is no dmx 512 signal, the unit will shut down.

2. The system allows multiple units (as slave units) to be connected together for synchronized operation without the console being in sound-activated or automatic mode.

3. LED indication and shutdown function: In sound activation mode, the unit panel has an LED indicating sound activation. When the music stops, the unit will be turned off after 8 seconds.

4. DPSS laser: diode pumped solid state green laser with stable output and long service life.


1. Do not expose the human eye directly to the laser beam.

2. Do not switch the device on and off frequently.

3. Ensure that the power supply is grounded before using this device.

4. This machine is for indoor use only and should be protected from water, mixing and vibration. The working temperature of this machine is 18-30℃. Do not use more than 4 hours continuously, otherwise it will shorten the service life of the machine.

5. Use cleaning paper to regularly remove the dust absorbed on the external lens to optimize light output.

6. Do not remove or break the warranty label, otherwise the warranty will be invalid.

7. Be sure to replace the exact same type of fuse, replacing any fuse other than the specified fuse may cause a fire or electric shock and damage your unit and void your warranty manufacturer.

Packing List:

Four-hole laser stage light * 1

Power cord *1

Remote control *1

Instruction manual *1