Model: ZQ01520

Color: black

Material: plastic shell

Voltage: AC100-240V 50/60Hz

Power: 64W

Light source: 1PCS 40W RGBW four-in-one LED + 76PCS * 0.2W SMD-RGB

Channel: 11CH, 14CH

Angle of light: 8°

Control mode: self-propelled, Sound control, master-slave, DMX

Luminance: R:9270 LUX@1m, G:14370LUX@1m, B:15900LUX@1m, W:16420 LUX@1m, RGBW:50000 LUX@1m

Display: LED display

Fuse: F3AL250V

Projection distance: 6-8M

LED average life: 30000H

Protocol: standard DMX512 protocol

Data connection: three core XLR input/output

Display: 4-digit digital display

Protection grade: IP20

Working environment: -20℃-40℃

Product Description:

This par light perfectly combines beam and background effects to provide professional lighting effects for performance stages, bars, KTV and other venues. It adopts a single 40W 4-in-1 lamp bead with small angle and even color mixing, and also with trigonometry effect, which makes the light more colorful. The three rings of RGB 3-in-1 light beads on the periphery can mix various colors to create different atmospheres. In addition, this par light comes with 18 built-in effects, which can be adjusted according to different occasions and needs, making your performance or party more exciting and eye-catching.

Product Features:

1. Uniform color mixing, bright colors: the product has excellent color mixing ability, which can evenly mix different colors and produce bright and full color effects.

2. Smooth dimming: The dimming function of the product is very smooth, which can smoothly adjust the brightness of the light and provide users with a comfortable visual experience.

3. Efficient heat dissipation system: the product is equipped with an efficient heat dissipation system, which can effectively dissipate the heat generated to ensure the stability and durability of the product.

4. Highly translucent acrylic lens: The product adopts highly translucent acrylic lens, which can improve the light transmission rate and make the light brighter and clearer.

5. Built-in effects: the product is built-in 18 different combinations of background effects, providing users with a variety of choices, increasing the product’s interest and practicality.

Safety instruction:

1. When opening the packing, take all accessories out, and remove the light to a horizontal table for good operation. First check whether the accessories are complete, then check carefully whether the whole light has no damage. If there is any damage, please keep it original and return to the factory.

2. AC Power:Check whether the local power supply is accordance with the requirements of the product rated voltage.

3. The product is only suitable for indoor working environment. The light should keep dry, keep away from wet, overheat or dusty environment. Don’t come into contact with water and other liquids to prevent or reduce the risk of electric shock or fire.

4. Please do not install the light directly on the surface of the combustible substance.

5. The people who install, operate and maintain of light professional certificate required.

6. When there are faults of the light, please stop using the light immediately. Don’t try to repair, please contact the nearest authorized technical assistance center, if the parts damage, always use the same type of parts replaced.

7. Don’t touch any electrical wiring in the process of operation to prevent the risk of electric shock.

8. To make sure the light working environment temperature, the highest do not exceed 40 ℃,the lowest do not exceed – 20 ℃.

9. Under the stable cooling working situation, the highest temperature of the  housing of the light can reach 80 ℃, please do not touch.

10. The light is design according to the type of electric shock protection. The light should be use in good connection grounding power system and the ground wire must connect with the ground wire of the power supply system. The earth sign port of the light should be connected to the installing fixtures.

11. Do not use the damage of the insulating layer wire and also do not use the power cord overlap on the other wire. When not in use or clean the light, please disconnect the power, don’t pull the plug in hard or just drag the wires.

12. There are no components inside for maintenance. Before start operation the light, please check whether all of the shell is installed.  In the case of the shell open used the light is prohibited.

Note: Under any installation, maintenance and clean the light, please confirm that has cut off the power cord!

Packing list:

1. Par light *1

2. Power cable *1

3. Bracket *2

4. S-shape handle screw *2

5. Black round washer *4

6. Instruction manual *1