Description

Specifications:

Model:ZQ01457

Color: black

Material: Metal case

Power: AC110V-240v 50/60Hz

Rated power: 100W

Light source:  4PCS LED single 30W RGB full-color three-in-one lamp bead

Channel: 1CH/ 3CH/ 7CH/ 12CH/ 16CH

Control Mode: DMX, Master/Slave, Sound control, Auto run

Angle of light: small angle: beam angle 23 °, large angle: beam angle 31 °

Illumination: R: 1000 × 4Lux@1m, G: 1350 × 4Lux@1m, B: 2000 × 4Lux@1m, full brightness: 4200 × 4Lux@1m

Projection distance: 4-6M

LED average life: 30000H

Protocol: standard DMX512 protocol

Data connection: three core XLR input/output

Display: 4-digit digital display

Protection grade: IP20

Working environment: -20℃-40℃

Product Features:

  1. Uniform color mixing and vivid colors: the product has excellent color mixing ability, which can produce uniform and vivid color effects, providing users with high-quality visual experience.
  2. The dimming function of the product is very smooth, while a variety of effects are built-in, which can be personalized according to different needs, increasing the fun and practicality of the product.
  3. Adopting the three-legged bracket installation, it is convenient for users to adjust the angle and position of the lamps according to their needs, improving the flexibility of use.
  4. The product is also equipped with foot button control mode, which is convenient for performers to quickly control the lighting effects and improve the performance quality.
  5. The product is built-in main and vice machine and voice control function, so that the user can conveniently control multiple lighting effects through the voice or controller.
  6. The product is equipped with LED 4-bit digital display, which makes the operation more simple and intuitive, convenient for users to use.
  7. Wide range of application: the product is suitable for discos, clubs, bars, parties, mobile DJs and many other places, with high practicality and universality.

Safety instruction:

  1. When opening the packing, take all accessories out, and remove the light to a horizontal table for good operation. First check whether the accessories are complete, then check carefully whether the whole light has no damage. If there is any damage, please keep it original and return to the factory.
  2. AC Power:Check whether the local power supply is accordance with the requirements of the product rated voltage.
  3. The product is only suitable for indoor working environment. The light should keep dry, keep away from wet, overheat or dusty environment. Don’t come into contact with water and other liquids to prevent or reduce the risk of electric shock or fire.
  4. Please do not install the light directly on the surface of the combustible substance.
  5. The people who install, operate and maintain of light professional certificate required.
  6. When there are faults of the light, please stop using the light immediately. Don’t try to repair, please contact the nearest authorized technical assistance center, if the parts damage, always use the same type of parts replaced.
  7. Don’t touch any electrical wiring in the process of operation to prevent the risk of electric shock.
  8. To make sure the light working environment temperature, the highest do not exceed 40 ℃,the lowest do not exceed – 20 ℃.
  9. Under the stable cooling working situation, the highest temperature of the  housing of the light can reach 80 ℃, please do not touch.
  10. The light is design according to the type of electric shock protection. The light should be use in good connection grounding power system and the ground wire must connect with the ground wire of the power supply system. The earth sign port of the light should be connected to the installing fixtures.
  11. Do not use the damage of the insulating layer wire and also do not use the power cord overlap on the other wire. When not in use or clean the light, please disconnect the power, don’t pull the plug in hard or just drag the wires.
  12. There are no components inside for maintenance. Before start operation the light, please check whether all of the shell is installed.  In the case of the shell open used the light is prohibited.

Note: Under any installation, maintenance and clean the light, please confirm that has cut off the power cord!

Packing List:

  1. Four head PAR light *1
  2. Power cable *1
  3. Foot Controller *1
  4. Tripod Stand *1
  5. Bracket *2
  6. Handle Screw x 6pcs+ Washer x4pcs *1
  7. Bag *1
  8. Instruction manual *1